Sony HDR-XR1 00 Operating Manual page 133

<D
Notes
• Connect your camcorder to the wall outlet
(wall socket) using the supplied AC Adaptor for
this operation (p. 19).
• High definition image quality (HD) movies
will be dubbed with standard definition image
quality (SD).
II]
AN connecting cable (supplied)
Connect the A/V connecting cable to the
input jack of another device.
[2J
AN connecting cable with 5 VIDEO
(sold separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(5 VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
Input
~
[1}-!
, .
(Yellow)
~
Signal flow
1:1
Insert the recording media in the
recording device.
• If your recording device has an input
selector, set it to the input mode.
fJ
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the AN connecting
II]
cable (supplied) or an AN
connecting cable with SVIDEO
[Z]
(sold separately).
• Connect your camcorder to the input jacks
of the recording device.
1£1
Start playback on your
camcorder, and record it on the
recording device.
67
AN Remote Connector
SVIDEO
~
0
VIDEO
E-ill
<I:)
(Yellow)
(White)
I~
AUDIu
L.
(Red)