Nokia E5–00 User Manual page 73

To add access points to an access point
group, select the group and
New access point. To copy an existing
access point from another group, select
the group, scroll to an existing access
point, and select
Organise Copy to other
>
To change the priority order of access
points within a group, scroll to an access
point, and select
Organise Change
>
Packet data access points
Select Menu Ctrl. panel
>
and Connection
Access point, and follow the
instructions on the screen.
To edit a packet data access point, open
one of the access point groups, and
select an access point marked with
.
Follow the instructions from your
service provider.
Select from the following:
Connection name — Define a name for
the connection.
© 2010 Nokia. All rights reserved.
Options
Options
>
dest..
Options
>
priority.
Settings
>
Destinations
>
Data bearer — You might not be able
to edit the data bearer once defined.
>
Define a new access point if needed.
Access point name — You obtain the
access point name from your service
provider.
User name — The user name may be
needed to make a data connection, and
is usually provided by your service
provider.
Prompt password — If you must enter
the password every time you log in to a
server, or if you do not want to save your
password in the device, select Yes.
Password — A password may be
needed to make a data connection and
>
is usually provided by your service
provider.
Authentication — Select
always send your password encrypted
or Normal
encrypted when possible.
Homepage — Depending on the access
point you are setting up, enter the web
address or the address of the
multimedia message centre.
Use access point — Select
confirmation
ask for confirmation before the
connection using this access point is
Connectivity
Secure
to send your password
if you want the device to
73
to
After