Nokia E5–00 User Manual page 167

WEP key in use — Select the desired
WEP key.
Authentication type — Select
Shared.
WEP key settings — Edit the settings
for the WEP key.
WEP key settings
In an ad-hoc network, all devices must
use the same WEP key.
Select WLAN security settings
key settings and from the following:
WEP encryption — Select the desired
WEP encryption key length.
WEP key format — Select whether you
want to enter the WEP key data in
ASCII or Hexadecimal
WEP key — Enter the WEP key data.
802.1x security settings
Select 802.1x as the WLAN security
mode.
802.1x authenticates and authorises
devices to access a wireless network,
and prevents access if the authorisation
process fails.
© 2010 Nokia. All rights reserved.
Open or
WEP
>
format.
Select WLAN security settings
from the following:
WPA/WPA2 — Select
Authentication Protocol) or
key (a secret key used for device
identification).
EAP plug-in settings — If you selected
WPA/WPA2 > EAP, select which EAP
plug-ins defined in your device to use
with the access point.
Pre-shared key — If you selected
WPA/WPA2 Pre-shared
>
the shared private key that identifies
your device to the WLAN to which you
connect.
WPA security settings
Select WPA/WPA2
mode.
Select WLAN security settings
from the following:
WPA/WPA2 — Select
Authentication Protocol) or
key (a secret key used for device
identification).
EAP plug-in settings — If you select
WPA/WPA2 > EAP, select which EAP
plug-ins defined in your device to use
with the access point.
Settings 167
and
EAP (Extensible
Pre-shared
key, enter
as the WLAN security
and
EAP (Extensible
Pre-shared