Nokia E5–00 User Manual page 157

number. Codes are shown as asterisks.
When you change a code, enter the
current code, then the new code twice.
Device and SIM card security
Select Menu Ctrl. panel
>
Settings General
>
To change the PIN code, select
and SIM card
>
code must be 4 to 8 digits long. The PIN
code protects your SIM card against
unauthorised use and is provided with
the SIM card. After three consecutive
incorrect PIN code entries, the code is
blocked, and you need to use the PUK
code to unblock it before you can use
the SIM card again.
To set the keypad to lock automatically
after a defined period, select
and SIM card
>
period.
To set a time-out period after which the
device is automatically locked and can
be used only if the correct lock code is
entered, select Phone and SIM card
Phone autolock
length of the time-out period in
minutes, or select
the autolock feature. When the device is
© 2010 Nokia. All rights reserved.
>
> Security.
Phone
PIN code. The new
Phone
Keypad autolock
period. Enter the
None to deactiveate
locked, you can still answer incoming
calls, and calls may still be possible to
the official emergency number
programmed into your device.
To change the lock code, select
and SIM card
lock code is 12345. Enter the current
code and then the new code twice. The
new code must be 4-255 characters
long. Alphanumeric (uppercase and
lowercase) characters can be used. The
device notifies you if the lock code is not
properly formatted.
Restore original settings
To restore the original device settings,
select Menu
and General
this, you need your device lock code.
After resetting, the device may take a
longer time to switch on. Documents,
contact information, calendar entries,
and files are unaffected.
Positioning settings
>
Select Menu
and General
Settings 157
Lock code. The default
>
Ctrl. panel Settings
> >
Factory settings. To do
>
Ctrl. panel Settings
> >
> Positioning.
Phone