Access Points - Nokia E5–00 User Manual

To select the interval for your device to
scan for available WLANs, and to update
the indicator, select
networks. This setting is not available
unless you select
availability > Yes.
To set the device to test the internet
capability of the selected WLAN
automatically, to ask for permission
every time, or to never perform the
connectivity test, select
connectivity test
automatically, Ask every
Never run. If you select
automatically or allow the test to be
performed when the device asks for it,
and the connectivity test is performed
successfully, the access point is saved to
internet destinations.
To check the unique media access
control (MAC) address that identifies
your device, enter *#62209526# in the
home screen. The MAC address is
displayed.
© 2010 Nokia. All rights reserved.
Scan for
Show WLAN
Internet
Run
>
time, or
Run

Access points

Create a new access point
Select Menu Ctrl. panel
>
and Connection
You may receive access point settings in
a message from a service provider.
Some or all access points may be preset
for your device by your service provider,
and you may not be able to change,
create, edit, or remove them.
When you select one of the access point
groups ( , ,
the access point types:
indicates a protected access
point
indicates a packet data access
point
indicates a wireless LAN (WLAN)
access point
Tip: You can create internet access
points in a WLAN with the WLAN wizard.
To create a new access point, select
Access point.
The device asks to check for available
connections. After the search,
connections that are already available
Connectivity
Settings
>
> Destinations.
, , ), you can see
71