Positioning Settings - Nokia E5–00 User Manual

100 Positioning (GPS)
when calculating the distance. Route
guidance is active only when you move.
To set your trip destination, select
Options Set destination
>
landmark as the destination, or enter
the latitude and longitude coordinates.
To clear the destination set for your trip,
select Stop navigation.
Trip meter
Select Menu Applications
>
Location GPS data
>
distance.
The trip meter has limited accuracy, and
rounding errors may occur. Accuracy can
also be affected by availability and
quality of GPS signals.
To turn trip distance calculation on or
off, select Options
calculated values remain on the display.
Use this feature outdoors to receive a
better GPS signal.
To set the trip distance and time and
average and maximum speeds to zero,
and to start a new calculation, select
and a
>
and Trip
Start or Stop. The
>
Options > Reset. To set the trip meter
and total time to zero, select Restart.

Positioning settings

Select Menu Ctrl. panel
>
and General > Positioning.
Positioning methods
Select from the following:
Integrated GPS — Use the integrated
GPS receiver of your device.
Assisted GPS — Use Assisted GPS (A-
GPS) to receive assistance data from an
assistance data server.
Bluetooth GPS — Use a compatible
external GPS receiver with Bluetooth
connectivity.
Network based — Use information
from the cellular network (network
service).
Positioning server
To define an access point and
positioning server for network-assisted
positioning methods, such as assisted
GPS or network-based positioning,
select Positioning
© 2010 Nokia. All rights reserved.
Settings
>
server.