Operating Your Train; Connecting The Engine And Coal Tender - Lionel G-Gauge Steam Set Owner's Manual

Operating your train

Connecting the engine and coal tender

P
lace the engine on the track first. Be sure that all wheels are within the track rails. Next
insert the power plug into the receptacle in the center back of the engine platform. See
Figure 6.
The engine will not run without this power plug inserted into the engine.
Note!
Place the Coal Tender on the track behind the Engine and connect the couplers. Be sure all
the Coal Tender's wheels are all on the track rails.
Note!
When you have finished running your train, unplug the harness from the
locomotive to stop the sounds from playing. Once the harness is plugged back in,
the sounds will reset to default. Unplugging the harness will also conserve battery
life.
Remove all batteries when the train will not be used for an extended
Important!
period of time. Lionel's Limited Warranty does not cover damage to your
tender caused from leaking batteries.
Figure 6. Connecting the engine and the coal tender
9
Connecting the
couplers