Table of Contents
Advertisement
Locomotive basics
LEGACY
Control System Engine Memory Module
™
T
his unique Engine Memory Module contains the specific system information and options
for your new Lionel
®
programmed your locomotive's new address following the instructions included in this
manual, follow these instructions to load this information from the Module to the LEGACY
Control System via your CAB-2 Remote Controller. This is a necessary step that you perform
only once.
1. Using your CAB-2 Remote Controller, address your Lionel LEGACY Control System-equipped
locomotive with its engine ID#.
2. Press INFO.
3. Insert the Engine Memory Module into the CAB-2 Remote Controller.
4. Press LOAD MODULE.
5. Verify that the Engine Memory Module information is correct for your selected engine. If
the information is correct, press YES to finish the download process for your engine.
6. An ENGINE DATA LOADED message will be displayed. Remove the Engine Memory
Module.
7. Press the red CTC button to return to your operating screen.
The information about your new locomotive will be downloaded into the system and
associated with the ID# that you have entered. All other CAB-2 Remote Controllers will have
this information, as well.
Refer to your LEGACY Control System Operations manual to learn how to operate your
locomotive in the LEGACY Control System environment.
LEGACY
™
Control System-equipped locomotive. After you have
11
Advertisement
Table of Contents
