Honeywell BENDIX/KING KLN 94 Pilot's Manual page 115

KLN 94 Pilot's Guide
just as if it was actually functioning in an aircraft. Distances count down,
waypoints sequence, and the deviation bar follows the progress of the
simulated flight. Using the take-home mode is an excellent way to learn
the operation of the KLN 94 without worrying about the engine running,
other traffic, or even terrain.
There are products available which allow you to use the KLN 94 at your
home, office, or hotel to have get-acquainted time in the take-home mode,
for instance the Commander 2000 from Lone Star Aviation. It is also help-
ful to do flight planning and perform database updates outside the
airplane, perhaps with a home personal computer.
For more information on the Commander 2000, or to place an order, con-
tact:
Lone Star Aviation Corp.
804 North Great S.W. Pkwy
Arlington, TX 76011
Phone: (817) 633-6103
FAX: (817) 633-6208
lonestaraviation.com
The KLN 94 is automatically put into the take-home mode when it is used
with a Commander 2000. In addition, an authorized Honeywell Service
Center may also arrange for you to put the KLN 94 into the take-home
mode by grounding the appropriate pin at the back of the unit while it is
removed from the aircraft and is connected to an appropriate power sup-
ply. The KLN 94 must never be put into the take-home mode when it
is installed in the aircraft. A special
page is displayed shortly after turn
on when the unit is in the take-home
mode (figure 3-194). Press the F
button to acknowledge the take-
home mode.
To use the take-home mode:
1. Make sure the unit is in the take-
home mode.
2. Select the SET 1 page (figure 3-
195).
3. Press the B button to turn on
the cursor (figure 3-196).
4. To start from the last position
skip to step 6. To change the
starting location enter the identi-
Chapter 3 Basic GPS Operation
Figure 3-194
Figure 3-195
Figure 3-196
3-73