Honeywell BENDIX/KING KLN 94 Pilot's Manual page 48

Chapter 3 Basic GPS Operation
this process for the last digit of
the time field. When the correct
time has been entered (figure 3-
14), press F to start the clock
running. Don't worry that you
can't update the seconds. The
KLN 94 system time will auto-
matically be corrected very precisely once a satellite is received.
7. To aid the GPS receiver in acquiring your position, it helps to have a
reasonable idea of where you are, and the Initialization page is where
you have the chance to set this initial position. Check to see if the dis-
played initial position is where you actually are. This latitude/longitude
is the last known position before the power was shut down the last
time. Unless the unit has been moved since its last use, this position
should be correct. On the right side of the screen will be the identifier
of the nearest airport in the data-
base, with a radial and distance
from that airport. If you need to
change the initial position to—
let's say—Omaha
(KOMA), move the cursor to the
WPT: field and use the right
inner knob to select a K as the
first character of the identifier
(figure 3-15). Move the cursor to
the right one character and
select an O and then right again
to select an M. The final A
should be filled in by the data-
base (figure 3-16). When you
press F, the latitude and longi-
tude fields will change to those
of KOMA (figure 3-17). If neces-
sary, the latitude and longitude
may be entered manually.
8. When all information on the Initialization page is correct, move the
cursor to Ok? using the right outer knob and press F to move on.
9. If the KLN 94 installation is approved for VFR use only or for IFR use
without approach capability, a page will be displayed after the
Initialization page to notify you of this.
NOTE: In some installations, KLN 94 is configured for use in IFR En route
and Terminal operations, but not for non-precision approaches. If this is
the case, line 3 will read GPS Approaches Disabled and you will not
have access to approaches in the database.
Eppley
3-6
Figure 3-14
Figure 3-15
Figure 3-16
Figure 3-17