Snmp Settings - EnGenius M36 User Manual

on VLAN do not have to be physically located next to one another on the LAN
Management VLAN ID
Apply / Cancel
Auction: If you reconfigure the Management VLAN ID, you may lose connection to the M36. Verify
DHCP server can support the reconfigured VLAN ID, and then re‐connect to the new IP address.
7.3 SNMP Settings
Click on the SNMP Settings link under the Management menu. This is a networking management
protocol used to monitor network‐attached devices. SNMP allows messages (called protocol data
units) to be sent to various parts of a network. Upon receiving these messages, SNMP‐compatible
devices (called agents) return data stored in their Management Information Bases.
If your network includes VLANs and if tagged packets need to pass through the
Access Point, specify the VLAN ID into this field. If not, select the No VLAN tag radio
button.
Press Apply to apply the changes or Cancel to return previous settings.
35