High Speed Data Rate Up
to 108Mbps
1.2 Feature
Access Point Mode
Repeater Mode
Mesh Mode
Multiple SSIDs
VLAN
QoS
Wi‐Fi Protect Access
1.3 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing. Do not
discard the packing materials, in case of return; the unit must be shipped in its original package.
1* Wireless Access Point Multi‐Function AP (M36)
1* 12V/1A Power Adapter
1* Mounting kit
1* QIG
1* CD (User Manual)
Capable of handling heavy data payloads such as MPEG video
streaming
Use this feature to setup the access point's configuration information.
It has support adjusting transmit power and channel. Client can access
the network with different regulatory settings and automatically
change to the local regulations.
Use this feature to extend the wireless signal coverage area.
Use this feature to establish a NET type of network. Mesh can reduce
the cost of the T1 and xDSL wired network. If one path of the network
is broken or blocked, the transmission is automatically find the best
path to the destination.
M36 supports up to 4 SSIDs on your access point. The following
options can be set to each SS to each SSID:
SSID for public or private network
-
Authentication is fully supported
-
VLAN identifier
-
Radius accounting identifier
-
Profile isolation for infrastructure network
-
Specify a VLAN number for each SSID to separate the services among
clients.
Use this feature to limit the incoming or outgoing throughput.
Wi‐Fi Protect Access is a standard‐based interoperable security
enhancement that increases the level of data protection and access
control for existing and future wireless LAN system. It is compatible
with IEEE 802.11i standard WPA leverages TKIP and 802.1X for
authenticated key management.
5