Step4
Auction: Wireless Client IP address must configure manually at the same subnet in Local Area Network or enable DHCP
server of M36 to retrieve IP automatically.
8.3 Mesh
In order to construct the Mesh Network, the following configuration must be the same.
Mesh
Step1
Step2
Step3
Step4
Step5
Step6
Step7
Step8
Step9
Note(1): Non‐M36 product may find difficulty of configuration.
Note(2): In Mesh Mode, recommended 1 Gateway with 4 Relay Linear and radiative deployment scenario.
Access Point
Step1
Step3
Step4
Note: For more advanced settings, please refer to the previous chapters.
Select correct authentication type and password.
Login to the web‐based configuration interface with default IP 192.168.1.1
Select your country or region's regulation.
Change device mode to Mesh from system properties.
Select wireless mode you would like to associate with.
Select channel/frequency you would like to associate with.
Specify SSID for the Mesh Network.
Setup the authentication settings.
Specify current device is a gateway or relay.
Press Apply to save all changes.
Specify the SSID for your broadcast SSID and you can also configure multiple SSID at
the same time.
Setup the authentication settings.
Press Apply to save all changes.
43