Table of Contents
Advertisement
Wireless Security
Refresh
Auction: If the Access Point is suppressed its own SSID, SSID section will be blank, the SSID must be
filled in manually.
4.2.3 Mesh Mode
Wireless Mode
SSID
Channel / Frequency
Mesh Profile
Access Point Profile
Apply / Cancel
Please refer to the Wireless Security section.
Press Refresh to scan again.
Select the desired 802.11 standard modes. There are three different modes and they
are 802.11b, 802.11g Only, and 802.11 b/g mixed.
Specify the SSID if known. SSID text box will be automatically fill in when select an AP
in the Site Survey.
The channel availability is based on the country's regulation.
Place a Check to act like gateway. Press Edit to configure the mesh profile and place
a Check to enable extra SSID.
Configure up to two different SSIDs, it can help to divide group of clients to access
the network. Press Edit to configure the profile and place a Check to enable extra
SSID.
Press Apply to apply the changes or Cancel to return previous settings.
15
Hide quick links:
Advertisement
Table of Contents
