Sensor - Honeywell HRDP DVR User Manual

Sensor

______________________________________________________________________________________________
Document 800-02089 Rev E
10/08
NO.
INPUT
Sensor Setup
1. Use the arrow buttons to select Sensor 1 and press ENTER to change
to N/O (Normally Open) or N/C (Normally Closed).
Repeat for all sensors.
2.
3. Select SAVE and press ENTER to save settings and exit Sensor Setup.
Relay Setup
Use the arrow buttons to select Relay 1 and press ENTER to turn OFF
1.
or ON.
2. Repeat for all relays.
Select SAVE and press ENTER to save settings exit Sensor Setup.
3.
Performance Series DVR User Guide
TYPE NO.
1 N/O 1
2 N/O 2
3
3 N/O
4 N/O 4
5 N/O
6 N/O
7 N/O
SET
8 N/O
9CH-16CH
SENSOR ACTION
SIGNAL
ON
ON
ON
ON
CLEAR
ALARM MONI TOR
47