Alarm Rec; Setting Sensor - Honeywell HNDR-S4824 User Manual

Basic Configuration HNDR-S4824

5.4. Alarm Rec.

This menu is to configure for the settings for alarm recording conditions. To activate this schedule, set
"Event Recording" under the "Normal Recording" tab to "On."
And "Alarm Source" should be set before alarm recording menu.

5.4.1. Setting sensor

It is for setting sensor type. HNDR-S Series supports Normal Open(N.O.) and Normal Close(N.C.)
types.
Global
To set all sensors by same conditions. Select one among "Off/N.O./N.C.", and press the "Apply" button.
Configuration
To set each sensor seperately.
Honeywell 39
2004.05.31 (v 2.0)