Client Configuration - Honeywell HRDP DVR User Manual

Client Configuration

______________________________________________________________________________________________
Document 800-02089 Rev E
10/08
Configure general remote access.
REMOTE PORT
WEB PORT
REMOTE CONFIG
MAX TRANSFER SPEED
Remote Port – Use this port number when configuring remote access
software. The default port is 4000 but can be changed.
Web Port – Used for remote connections using a web browser. This port
should be open on the router. Default web port is 80.
Remote Config – Enable to allow an administrator to change configurations
using remote access software.
Max Transfer Speed – Set network bandwidth. If the network is low speed, set
this value as the network (aka. Bandwidth Throttling).
Performance Series DVR User Guide
4000
80
ENABLE
100 Mbps
51