Motion/Event Configuration; Input - Honeywell HRDP DVR User Manual

Motion/Event Configuration

Input

______________________________________________________________________________________________
Document 800-02089 Rev E
10/08
Motion / Event Configuration has four sections; Input, Sensor, Action, and
Alarm Monitor. When an event comes in (Input) the DVR records the image
according to its settings (Camera Configuration) and triggers an alarm (Action).
MOTION/EVENT CONFIGUR ATION
CH
1
2
3
4
5
6
7
8
9CH-16CH
INPUT
CH – Channels 1-8 /
MOTION – On/Off [Specify whether to use motion input or not.]
SENS (Sensitivity) – Low / Normal / High / Highest
AREA – Define the motion detection area.
SENSOR – Associate a sensor with the camera channel.
V-LOSS (Video Loss) – Select a channel to report video loss on.
Performance Series DVR User Guide
MOTION SENS AREA SENSOR
ON NORMAL
ON NORMAL
ON NORMAL
ON NORMAL
ON NORMAL
ON NORMAL
ON NORMAL
ON NORMAL
SENSOR ACTION
SAVE CANCEL
Channels 9-16
INPUT
V-LOSS
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ALARM MONITOR
45