Change The Remote Access Pin Code; Charge The Handset; Check The Battery Level; What Is Standby Mode - Philips S10 User Manual

S10; s10a
Hide thumbs Also See for S10:
Table of Contents

Advertisement

Change the remote access
PIN code
Note
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Tap
from the main menu screen.
2
Select [Remote access] > [Change PIN].
3
Enter the old remote access PIN/passcode,
then tap [OK] to confirm.
4
Enter the new remote access PIN/
passcode, then tap [OK] to confirm.
5
Enter the new remote access PIN/
passcode again, then tap [OK] to confirm.
» The setting is saved.

Charge the handset

Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear
a docking tone (see 'Set the docking tone' on
page 38).
» The handset starts charging.
Note
Charge the battery for 6 hours before first use.
It is normal for the handset to become warm during
charging.
Over time, capacity of batteries decreases. This is a
normal battery behavior.
You can order replacement batteries through www.
philips.com or the Philips Service organization.
When the phone is not in use, place the handset to the
base station or charging cradle.
Your phone is now ready to use.
EN
8

Check the battery level

The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (from full to low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging is complete.
When the battery is empty, this
icon flashes. If you are in a call you
hear an alert tone.
The battery is low and needs
recharging.
If you are on the phone, you hear warning
tones when the battery is almost empty.
The handset turns off when the battery is
completely empty.

What is standby mode?

Your phone is in standby mode when it is idle.
In standby mode the screen will display the
time and date and notifications of missed calls
or messages. Depending on your settings, a
screensaver will also be displayed in standby
mode (see 'Screen saver' on page 40). The

Advertisement

Table of Contents
loading

This manual is also suitable for:

S10a

Table of Contents