Download  Print this page

Baby Monitor; Activate/Deactivate The Baby Unit; Send An Alert - Philips S10 User Manual

S10; s10a
Hide thumbs

Advertisement

23 Baby monitor

Your phone can act as a baby monitor and send
an alert if the sound level exceeds a pre-set
limit. For this, it needs to be placed as a "baby
unit" within the baby's room.
Caution
Make sure the baby unit and the cord are always out of
reach of the baby.
Place the baby unit at least 1 meter/3 feet but not
more than 2 meters/6 feet away from the baby.
Activate/Deactivate the baby
unit
1
Tap
from the main menu screen.
2
Select [Activate] to activate the baby unit.
Tap [Stop] to deactivate it.
Tip
If you try to activate the baby monitor function, without
having specified where an alert should be sent to, then
you will be asked to select to where you send the alert:
external lines or other handset number. For information,
see the next section.
Note
When the baby monitor mode is activated, the baby
handset does not ring on incoming calls.
46
EN
1-2m

Send an alert

You can send an alert to other handsets within
the home or an external line. External line can
be a mobile phone or another fixed line outside
the house.
Note
Make sure that any prefix digits and/or country code
are included when you send an alert.
Send alert to other handsets
1
Tap
from the main menu screen.
2
Select [Send alert] > [Intercom].
3
Select the handset number.
Note
Make sure that the distance between the baby unit and
the parent unit is at least 1.5 meter away from each
other to prevent the howling effect.
Send alert to an external line
1
Tap
from the main menu screen.
2
Select [Send alert] > [External line].
3
Enter a telephone number, then tap [Set].
Note
You can still send an alert to the external line even
though it is in the barred list.
1.5m

Advertisement

loading

  Also See for Philips S10

  Related Manuals for Philips S10

This manual is also suitable for:

S10a