Get Started; First Steps; Remove The Battery; Insert The Sim Card - Philips CT9888-FMUA3NNZ Manual

1 • Get started
L

First steps

To use your phone, you must insert a valid SIM card supplied by your GSM
operator or retailer. The SIM card contains your subscription, your mobile
number, and a memory in which you can store phone numbers and messages
(see "Phonebooks" page 38).

Get started

Remove the battery

First remove the battery as shown opposite: press below
the rubber (Philips logo) and slide the battery downwards
(if it isn't clipped on the phone, see next step).

Insert the SIM card

Then remove the SIM card from its card holder and slide it
into its slot, microchip facing connectors, until it stops. Be
careful that the clipped corner is in the identical position as
on the drawing.

Replace the battery

Replace the battery as shown opposite: place it on the back
of the phone (battery connectors downwards), then push
it into place until latch catches.
Remove the protective film before using the phone.

Enter the PIN code

1
2
Read the safety instructions in the "Precautions" section before use.
To switch on the phone, press and hold the
When you switch on the phone, you may be prompted to enter a PIN
code, which is the 4 to 8-digit secret code of your SIM card to protect it
C
key.
9