Important Information For your safety Installation requirements Need Help? What’s in the box? Your SE735 Overview of the handset Overview of the base station Main features of your SE735 Connect Install USB Connection Call Phonebook Call log Clock & Alarm...
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950. Need Help? For more information on troubleshooting: Troubleshooting: page 66 Please refer to the following website for more information on Philips web support: Online Support www.philips.com/support Important Information...
What’s in the box? The following accessories are included with your SE735: 2 AAA Base station Power supply for Line cord Handset rechargeable base station batteries Battery door Headset USB cable Belt clip Quick Start Warranty card User Guide Installation CD Guide The line adaptor may not be attached to the line cord.
Overview of the handset LCD Screen Event LED Left Soft key Talk key Keypad lock Loudspeaker Your SE735 Earpiece Up/Down Navigation keys Right Soft key Hang-up key Alphanumeric keypad Case key / Pause key / Ringer off key Intercom key...
Short press from menu browsing to return to the previous menu. *WARNING Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Your SE735...
Page 8
There are new voicemail messages received. The number of new voicemail messages received is also displayed on the left of the icon. There are new answering machine messages received. The number of new messages received is also displayed on the left of the icon. Your SE735 mode is activated.
Overview of the base station Paging key Answer Machine On/Off key Base station keys Your SE735 Play/Stop key Previous message/ Replay message key Page handset. Long press to start registration procedure. Short press to turn the answering machine On/Off. Increase speaker volume during message playback.
LCD Message counter Main features of your SE735 The following is an overview of the menu options that are available in your SE735. For detailed explanation of the menu options, please refer to the corresponding sections in this User Guide.
In this example, the alarm is Once. • To change your selection. • To confirm your selection. • Return to previous menu level or stand-by screen Your SE735 Action Choose by pressing the key MENU directly below it (left soft key...
The location of your base station can have an effect on the range and performance of your SE735 (see TIP below). Connecting the Base Station Place the base station in a central location near the telephone line socket and electricity sockets.
Install battery Your SE735 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 168 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. Slide out the battery cover.
Configure your SE735 Before you use your SE735, you need to configure it according to the country of use. After charging it for a few minutes, the word WELCOME appears in various languages. Follow these steps to configure your phone:...
Please check the date & time settings in your ISDN system or contact your network provider. Now, you are ready to use your phone. Basic operations of your SE735 Make a call Enter the phone number (maximum 20 digits) and press For details, please refer to "Make a call"...
Screen and keypad backlight The backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc. The colour of the LCD and keypad backlight is WHITE. For setup details, please refer to "Backlight time"...
USB connection Your SE735 is able to download melodies (maximum 20 KB, in MIDI format), wallpapers (128 x 160 pixels), as well as portrait pictures for fotocall (96 x 64 pixels) from your PC to your handset via USB connection. There are also a number of ring melodies, wallpaper and fotocall pictures pre-installed in your handset and the installation CD.
To answer the call, press Download melodies There are 16 ring melodies pre-installed on your SE735. You can add an additional ring melody (maximum 20 KB) or replace it by downloading a new melody from your PC to your handset via USB connection.
Page 19
When the download is completed, safely remove your handset from your PC. Download wallpapers There are 6 wallpapers pre-installed on your SE735. The 3rd wallpaper can be overwritten by downloading a new wallpaper from your PC to your handset via USB connection. The 4th wallpaper is a blank wallpaper.
A progress bar is displayed to indicate the download progress. When the download is completed, safely remove your handset from your PC. Download photo IDs There are 20 fotocall pictures pre-installed on your SE735. You can download and overwrite any existing fotocall picture via USB connection. Download Software...
Make a call Predialling Enter the phone number (maximum 20 digits). Press to dial the number. Direct dialling Press to take the line. Enter the phone number. Call from redial list > Press in stand-by mode. REDIAL Scroll to an entry in the redial list. Press to dial the number.
Handsfree answering When the phone rings, press Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. TIP If Auto Pick-up station to answer the call. This feature is deactivated by default. WARNING When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.
Page 23
Adjust loudspeaker volume Volume 1 Press key to select from Initiate a second call (subscription dependent) > Press and select OPTION call. Transfer call (subscription dependent) > Press and select OPTION The screen shows R4. Enter the phone number that you want to transfer your incoming calls to. Consult phonebook >...
Switch between an internal and external call Press key once to switch between an internal call and external call. Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
Page 25
Call Fotocall This feature allows you to link a picture to a contact in your phonebook. If you have subscribed to Caller Line Identification service from your network operator, when the contact calls you, the name of the caller will appear along with the corresponding picture on the handset screen and the melody defined for that contact will ring.
Your SE735 can store up to 250 phonebook memories, including 10 direct access memories ( Each phonebook entry can have a maximum of 20 digits for the phone number and 14 characters for name. Access phonebook Press in stand-by mode or press...
Scroll to the picture you wish to associate with the contact or select SELECT A validation tone is emitted. If you have selected a picture for the contact and have subscribed to Caller Line Identification service from your network provider, the phone will display the picture and name of the contact on the handset screen when the contact calls you.
Page 28
Store direct access memory You can store up to 10 direct access memories (Key mode will automatically dial the stored phone number. Press MENU , scroll SELECT (Key 0 Select a key name will be displayed. If there is no number stored for the selected key or if you want to change the number currently stored, press SELECT and press...
Slide the SIM card between the retaining clips, microchip facing up, until it stops. Put the SIM card tray back in the slot on the base station and push into place until it latches. On the handset, press MENU from SIM and press SELECT Copy All...
Page 30
Select If you choose For each selected entry, you will be prompted on the selected handsets whether or not to overwrite the phonebook entry in the target phonebook. OVERWRITE? will be displayed on the selected handsets, press cancel. Press to confirm. SELECT The handset numbers which are available for transfer will be displayed.
The call log offers quick access to the last 30 entries of your incoming calls. If you have subscribed to Caller Line Identification service, the identity of the caller (caller’s number or name) will be displayed together with the date and time of the call. The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list.
Page 32
Access redial list > Press REDIAL in stand-by mode and scroll View details of a redial list entry > Press in stand-by mode and scroll REDIAL Press MENU and press Save redial list entry to phonebook > Press in stand-by mode and scroll REDIAL Press MENU...
You can create up to 10 SMS boxes Your SE735 can store up to 100 SMS messages (80 SMS in the Inbox and 20 SMS in the Draft box) shared by all the SMS boxes and the maximum length of each message is 160 characters.
Page 34
Operation space 1 @ _ # = < > ( ) & a b c 2 à ä ç å æ d e f 3 é è g h i 4 ì j k l 5 m n o 6 ñ ò ö p q r s 7 t u v 8 ù...
Page 35
Send Press SELECT the message. The message will be sent immediately. SMS Sent! will be displayed if the message has been sent successfully. If the message cannot be sent successfully, the screen will display be saved in the SMS editor buffer. WARNING When composing your SMS, if no keys are pressed for 30 seconds, the handset will return to stand-by mode.
Page 36
Press while viewing the message content/sender number/date/time stamp will abort the SMS function and dial the sender’s phone number. Press to return to Inbox message list. Reply to an Inbox message While viewing the message content, press Scroll Reply and press After editing, press Refer to steps 5 to 7 in "Write and send new SMS"...
Draft box SMS messages that are saved as drafts will be automatically stored in the up to 20 messages. Save a message in the Draft box After writing the message, entering the phone number and the desired box, press Scroll to Save as draft.
SELECT again to confirm deletion. SMS settings This menu allows you to set up the server for sending and receiving SMS messages. Your SE735 can receive messages from 3 service centers. Each service center consists of 2 numbers: - Incoming number - Outgoing number The maximum length of an incoming/outgoing number is 20 digits.
Page 39
To set outgoing number The incoming and outgoing numbers of your SE735 are already set to work on your country network. We advise you not to modify these settings. For more details or in case of any problems, please contact your local network provider.
Enter the number and press A validation tone is emitted. The maximum length of an outgoing number is 20 digits. To set incoming number Press , press MENU scroll SMS Center Incoming Nr. Scroll Enter the number and press A validation tone is emitted. The maximum length of an incoming number is 20 digits.
Clock & Alarm Set date and time Press , scroll MENU Date/Time. Enter the current time (HH:MM) and current date (DD/MM/YY) and press Enter the date in Day/Month/Year format and the time in 24-hour format. A validation tone is emitted and the screen returns to Once the date and time are set, there will be time &...
Do not Disturb mode This feature is available only if you have subscribed to Caller Line Identification from your network provider. When Do not Disturb mode is activated, the phone will ring only when there are calls received from autho- rised groups.
Personal Settings Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, To set ring volume Press , scroll MENU Tones and press SELECT Scroll to your desired volume level and press A validation tone is emitted and the screen returns to previous menu. When Silence is activated, the icon...
Press SELECT to set the ring melody. A validation tone is emitted and the screen returns to previous menu. My Melody You can add an additional ring melody (maximum 20 KB) or replace it by downloading a new melody from your PC to your handset via USB connection (see "USB Connection"...
This feature allows you to select the wallpaper to be displayed in stand-by mode. There are 6 wallpapers pre- installed on your SE735. The 3rd wallpaper can be overwritten by downloading a new wallpaper from your PC to your handset via USB connection. The 4th wallpaper is a blank wallpaper. Please see "Default settings" on page 16 for the default wallpaper.
SELECT Edit the handset name and press A validation tone is emitted and the screen returns to previous menu. Maximum length of the handset name is 14 characters and the default handset name is PHILIPS. Personal Settings Personal Set and press...
, scroll MENU SELECT Scroll and press A validation tone is emitted and the screen returns to previous menu. Language Your SE735 can support different display languages. To change the language Press MENU , scroll SELECT Scroll to your desired language and press A validation tone is emitted and the screen returns to previous menu.
To activate Babysit mode Press MENU , scroll SELECT In Babysit mode, all keys are deactivated except for screen when this function is activated and the handset cannot perform any normal operation (making an outgoing call, receiving an incoming call, intercom another handset, paging, etc.). Scroll through the list of handsets available and press You can still perform all normal operations (making an outgoing call, receiving an incoming call, intercom another handset, paging, etc.) on the selected handset.
Recall time (or dial delay) is the time delay by which the line will be disconnected after you press can be set to short, medium or long. The default value of recall time that is preset in your SE735 should be the best suited for your country network and therefore you should not need to change it.
Dial Mode (only for UK) The default value for dial mode that is preset in your SE735 should be the best suited for your country network and therefore you should not need to change it. Tone There are 2 dial modes:...
A validation tone is emitted and the screen returns to previous menu. Registration The procedures described below are the procedures that you will find in your SE735 handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset.
A validation tone is emitted to indicate successful registration and the screen returns to stand-by mode. Select Base One SE735 handset can be registered to up to 4 different SE735 Base stations. By default, the handset will register to BASE 1. If you select...
Advanced Settings Change Master PIN The Master PIN is used for setting call barring/baby call number, registration/unregistration of handsets and for accessing the answering machine remotely. The default Master PIN number is 0000. The length of the PIN is 4 digits.
Conference Mode When Conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress. The default setting for this mode is Off.
Contact your network provider for more information about these services. The default numbers and values that are preset in your SE735 should be the best suited for your country network and therefore you should not need to change them.
Deactivate Scroll The number for that selected service will be dialled. When the number has been dialled, press Voice Mail This feature allows the caller to leave a voice message when you are unable, or do not wish to take a call yourself.
Network Services Cancel Call Back Setting Press , scroll MENU SELECT Scroll Settings and press Enter the required number for cancelling of call back and press Activate Cancel Call Back Press , scroll MENU SELECT Press to Activate. SELECT The number for that selected service will be dialled. When the number has been dialled, press Withhold ID Setting...
Memory The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4 matrix. To start the game Press , scroll MENU...
Telephone Answering Machine (TAM) Your SE735 features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages within the maximum recording time of 30 minutes. The maximum recording time for each message is 3 minutes.
Page 60
Telephone Answering Machine (TAM) LCD Message counter Play Playback of new messages via handset Press , scroll MENU The new messages will be played via the loudspeaker. During playback, you can: Adjust volume Stop playback Repeat Next message Previous message Delete message Switch the playback to earpiece...
Telephone Answering Machine (TAM) TIP You can also playback messages by pressing Machine and press SELECT Playback of old messages via handset Old messages can only be played if there are no new messages. The first recorded message will be played first and the next message will be played automatically until there are no more messages.
Telephone Answering Machine (TAM) Set Outgoing Messages (OGM) If you set the answering mode as message as Predefined The current selected mode is highlighted. To change it, scroll Predefined Outgoing Messages to set your outgoing message as Predefined, you can press Press SELECT outgoing message.
Telephone Answering Machine (TAM) Add VIP numbers Press MENU , scroll press SELECT VIP Mode Scroll and press Press to enter the SELECT The numbers in the VIP list will be displayed. If it has not been set before, the screen will display Empty. Scroll to select an entry and press to select Add.
Page 64
Telephone Answering Machine (TAM) Scroll to your desired ring delay setting Toll saver mode can save you the cost of a long-distance call when you check your messages remotely. If there are new messages in your answering machine, the outgoing message will start playing after 3 rings.
Telephone Answering Machine (TAM) Delete current message. Turn the answering machine on/off. Call screening Handset call screening If Handset Call screening is set to On, you may press mode. If you decide to pick up the call, press automatically. If you press , the call will be cut off and the recording will be ignored.
Troubleshooting of the phone Please refer to the following website for more information on Philips web support: www.philips.com/support Problem icon is not blinking when the handset is placed on the base No dialling tone Poor audio quality icon is blinking...
• Base station is already busy • when using a handset Noise interference on your Your SE735 base station or mains radio or television power pack are too close to electrical appliances Caller Line Identification (CLI)
Page 68
The answering machine does not record messages Remote control access does not work Cannot record outgoing message The SE735 hangs up during remote access The answering machine stops automatically Troubleshooting Causes • Memory is full • The ANSWER ONLY mode has been activated •...
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.