Powering On The Device; Checking After Power-On - Huawei S3700 Series Quick Start Manual

S3700&S5700&S6700 Series Ethernet Switches
Quick Start
Table 4-4 Signal cable checklist
No.
1
2
3
4
5
6

4.2 Powering on the Device

Turn on the power module of the device.

4.3 Checking After Power-on

Check the following items after the device is powered on:
l
l
l
Issue 02 (2012-09-10)
Item
All the signal cables to be deployed pass
the continuity check.
No signal cable is placed on the heat
dissipation holes of the cabinet.
The bent part of a signal cable cannot be
too tight.
The cables in the cabinet cannot be
crossed and the cables outside the cabinet
are bound.
The two ends of a signal cable are clearly
identified by labels and the texts on the
labels are in the same direction.
The bolts that fix the cables are tightened. -
The sound of fan rotating can be heard and that the air exhaust from the air vents can be
felt.
The indicators of the power modules run normally. Normally, the INPUT and OUTPUT
indicators are on.
The indicators of the fan modules run normally. Normally, the STATUS indicator is on.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Powering on the Device
Method
-
-
-
-
53