S3700&S5700&S6700 Series Ethernet Switches
Quick Start
Display Mode
The S5700-28C-EI and S5710-28C-EI are non-PoE switches with dual power supply units.
Figure 2-7 S5700-28C-EI indicators
Table 2-11 Description of S5700-28C-EI indicators
No.
1
Issue 02 (2012-09-10)
Status
Blinking green
Indicator
Identifier
Power
PWR1
indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Product Hardware Introduction
Description
The device is a command switch:
l If the indicator of an interface
blinks, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device blink,
the stack ID of the device is 0.
Status
Description
Off
The power supply
units are not present,
or the power supply is
abnormal when a
single power supply
unit is used.
Green
The power supply is
normal.
Red
l Two power supply
l The power supply
l The power supply
2 3
4
1
5
units are installed
properly, but not
switched on.
units are switched
off.
units are faulty.
23