Logging In To The Web System Client - Huawei S3700 Series Quick Start Manual

S3700&S5700&S6700 Series Ethernet Switches
Quick Start
Configuration Files
l

5.3 Logging In to the Web System Client

Before configuring the switch, you must log in to the Web system client.
Context
l
l
l
Procedure
Step 1 Open Microsoft Internet Explorer 6.0 on the client.
Step 2 Enter the universal resource locator (URL) of the Web system client in the address bar and press
Enter. The User Login dialog box is displayed, as shown in
The URL is in the format http://IP/view/login.html, for example, http://10.164.19.131/view/
login.html.
Issue 02 (2012-09-10)
SwitchA
#
sysname SwitchA
#
vlan batch 1
#
vlan 1
description admin_VLAN
#
interface Vlanif1
ip address 10.10.10.10 255.255.255.0
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 1
#
aaa
local-user huawei password simple huawei
local-user huawei service-type telnet
local-user huawei privilege level 15
authentication-scheme default
#
authorization-scheme default
#
accounting-scheme default
#
domain default
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
#
return
Before logging in to the Web system client, ensure that the switch has been commissioned
and the Web system server is enabled on the switch.
The Web system client connects to the switch through HTTP; therefore, you must log in
to the Web system client through HTTP.
It is recommended that the Web system client should run the Windows XP operating system
because other operating systems may be imcompatible with the web system.And the Web
system client supports the Microsoft Internet Explorer 6.0 (IE6) and Firefox 3.0, or later
versions. The Web system client described in this document uses the IE6.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Logging in to the Device
Figure 5-6.
61