Huawei S3700 Series Quick Start Manual page 62

S3700&S5700&S6700 Series Ethernet Switches
Quick Start
Figure 5-3 Specifying parameters
Table 5-1 Parameters
Parameter
Bit per second (baud rate)
Data bit
Parity check
Stop bit
Flow control (traffic control)
Step 5 After the HyperTerminal starts, choose FileAttributes to display the COMM1 Properties
dialog box, as shown in
down list box. Click OK to complete the setting.
Issue 02 (2012-09-10)
Figure 5-4. On the Setting tab, select VT100 in the Emulation drop-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
9600
8
None
1
None
5 Logging in to the Device
57