Table of Contents
Advertisement
• OPERATION :
full screen. Pressing another camera button will display that camera
full screen. Press
previously defined by the user.
PIP (Picture in Picture) inserts a selected camera as a small
image in the main image.
• OPERATION :
you want displayed in the insert.
Puts the multiplexer in 2x2 display mode or the second user-
defined display mode
• OPERATION :
Press
2nd
and then
previously defined by the user.
Puts the multiplexer in PIP4 display mode or the third user-
defined display mode
• OPERATION :
Press
2nd
and then
defined by the user.
Puts the multiplexer in 3x3 display mode or the fourth user-
defined display mode
• OPERATION :
Press
2nd
and then
defined by the user.
Puts the multiplexer in the Sequence Mode.
• OPERATION :
while in the 2x2, 3x3, PIP or User-defined Modes 1 to 4. Press
while in the Full-Screen Mode to start or stop a User-defined
sequence.
Press
2nd
,
Sequences 1 to 4 respectively.
Press
and the currently selected camera displays
2nd
and then
Press
and then the camera button of the camera
Press
and four cameras display on the screen.
to display the second screen layout
Press
and five cameras display on the screen.
to display the third screen layout previously
Press
and nine cameras display on the screen.
to display the fourth screen layout previously
Press
to start or stop all cameras sequencing
and camera buttons 1, 2, 3 or 4 to start or stop Spot
to display a screen layout
54
Advertisement
Table of Contents
