Figure 19 - Motion Action Setup (2) Screen - Honeywell HXMT9 / HXMT9X Installation Manual

• Recording :
motion alarm condition. INT interleaves images from the camera with
an alarm every other field giving you more images from that camera.
When there are multiple alarms, the cameras with alarms are
interleaved. ONLY records images from only the camera with an
alarm condition. UNC leaves the recording parameters unchanged.
• Spot Monitor 1 to 4 :
the camera with a motion alarm condition. When there are multiple
alarms, cameras with alarms will display sequentially. When set to Off,
that Spot Monitor's display does not change during motion alarm
conditions.
• Next > : This takes you to the Motion Alarm Action Setup (2)
submenu.
• Exit : Saves your changes and returns to the Main Menu.
Motion Action Setup (2)
This allows you to select how video will record during a
When set to On, that Spot Monitor will display
< Figure 19 > Motion Action Setup (2) screen.
24