Table of Contents
Advertisement
• Recording :
Manual alarm condition. INT interleaves images from camera with an
alarm every other field giving you more images from that camera.
When there are multiple alarms, the cameras with alarms are
interleaved. ONLY records images from only the camera with an
alarm condition. UNC leaves the recording parameters unchanged.
• Spot Monitor 1 to 4 :
the camera with a Manual alarm condition. When there are multiple
alarms, cameras with alarms will display sequentially. When set to
Off, that Spot Monitor's display does not change during Manual alarm
conditions.
• Hold Time :
1 to 99 seconds. Hold Time is applicable only if the alarm action is set
to Timed OUT.
• Next > :
This takes you to the Manual Alarm Action Setup (2)
submenu.
• Exit :
Saves your changes and returns to the previous menu.
This allows you to select how video will record during a
When set to On, that Spot Monitor will display
This allows the user to set the alarm actions to last from
28
Advertisement
Table of Contents
