Remote Command Set - Honeywell HXMT9 / HXMT9X Installation Manual

Remote Command Set

Simple three-character ASCII commands represent single or
combination front panel button presses on the multiplexer. The effect of
a button press or remote command depends on the multiplexer's current
status. Check the multiplexer's current status before issuing a remote
command. Because this multiplexer has a different front keys from the
old model, some new commands are added to control the multiplexer
correctly.
ASCII MULTIPLEXER KEY
/PA PALARM
/TP VCR
/MA MACRO
/SX RECORD
/FZ FULL
/PP PIP
/22 2 x 2
/P4 PIP4
/33 3 x 3
/SQ SEQUENCE
/2N 2ND
/FR FREEZE
/ZO ZOOM
/ST SET
/ES ESC
/UP UP
/DO DOWN
/LE LEFT
/RI RIGHT
< Table 2 > Front key emulation commands
75
ASCII MULTIPLEXER KEY
/01 Camera 1
/02 Camera 2
/03 Camera 3
/04 Camera 4
/05 Camera 5
/06 Camera 6
/07 Camera 7
/08 Camera 8
/09 Camera 9