Table of Contents
Advertisement
• Normal & Alarm Record :
need to set is the hours. If you selected User Define, you need to set
the hours and field delay. Although you can set Normal and Alarm
hours the same, you usually want higher quality video in an alarm
situation. For example, you might set Normal to 24-hour time-lapse
and Alarm to 2-hour mode. You will need to get the field delay rates
from your VCR manufacturer.
• Exit :
Saves your changes and returns to the previous menu.
Recording Index Setup
Normally, the multiplexer gives the same priority to all cameras.
However, you can set it up so that cameras are given different recording
priorities.
• + :
Increases the camera number by one.
• - :
Decreases the camera number by one.
• < :
Scrolls through the camera array to the left.
• > :
Scrolls through the camera array to the right.
If you selected a VCR from the list, all you
< Figure 34 > Recording Index Setup screen.
42
Advertisement
Table of Contents
