Figure 8-3 Jumper Jp1 - Jp4 Settings - Honeywell VideoBloX User Manual

CHASSIS INTERLINK INPUT AND OUTPUT MODULE
Rev 1.0
There are no adjustments / DIP switches on the interlink output module. User configurable
jumpers allow this module to be available in two options, channel 1 to 32 and channel 33
to 64. Should a matrix be expanded to more than 64 outputs, these two options are still
used and refer to the backplane channels within each subrack. Interlink outputs are
connected to interlink inputs in the main chassis by means of cables with RJ45 connectors,
each carrying 4 signals.
Figure 8-3 Jumper JP1 - JP4 Settings
46 900.0855
10/06