Dip Switch Settings; Video Output Gain Adjustment; Output Ranges - Honeywell VideoBloX User Manual

VIDEO OUTPUT MODULES

DIP SWITCH SETTINGS

VIDEO OUTPUT GAIN ADJUSTMENT

OUTPUT RANGES

Rev 1.0
Modules are equipped with:
• Front panel accessible gain adjustment
• Limited protection against over-voltages, such as those induced by power surges and
nearby lightning strikes. The output module has a range of jumpers which are
populated to determine which group of 16 video outputs the module receives from the
backplane.
Caution The user should not modify the jumpers. Output cards should be
ordered for specific output channels.
Refer to Chapter 5, TITLED VIDEO OUTPUT
Refer to Chapter 5, TITLED VIDEO OUTPUT
The output cards use a daughter board to set the output range (i.e. monitor 1-16 or 17-32,
etc.). Refer to the appropriate paragraph in
DAUGHTER BOARD SETUP,
BOARD SETTING, VIDEO OUTPUTS
17-32, MODULE BOARD SETTING, VIDEO OUTPUTS
VIDEO OUTPUTS 49-64, for the desired output range and positioning of the daughter board.
MODULE, DIP SWITCH
MODULE, VIDEO OUTPUT GAIN
Chapter 5, TITLED VIDEO OUTPUT
MODULE BOARD SETTING, VIDEO OUTPUTS
1-16, MODULE BOARD SETTING, VIDEO OUTPUTS
33-48, or
28
SETTINGS.
ADJUSTMENT.
MODULE,
1-64, MODULE
MODULE BOARD SETTING,
900.0855
08/06