Dip Switch Settings; Figure 5-2 Location Of Video Output Daughter Board - Honeywell VideoBloX User Manual

TITLED VIDEO OUTPUT MODULE

DIP SWITCH SETTINGS

Rev 1.0
Titled Video Output Modules are equipped with:
• 24 character by 12 line text generation capability.
• Built in real time clock.
• Non-volatile RAM with Lithium battery to back up memory for storing camera titles
during power down. The camera titles are stored on the output card.
• Limited protection against over-voltages, such as those induced by a nearby lightning
strike.
The video output cards use a daughter board to set the output range (i.e. monitor 1-16 or
17-32, etc.).
Figure 5-2 Location of Video Output Daughter Board
Daughter Board
Refer to the appropriate paragraph below,
1-16, MODULE BOARD SETTING, VIDEO OUTPUTS
VIDEO OUTPUTS 33-48, or
required video outputs for positioning of the daughter board.
MODULE BOARD SETTING, VIDEO OUTPUTS
17-32,
MODULE BOARD SETTING, VIDEO OUTPUTS 49-64
30
MODULE BOARD SETTING,
for the
900.0855
10/06