Led Indications; Table 2-4 Led Indicators - Honeywell VideoBloX User Manual

REAR CHASSIS

LED INDICATIONS

LED Name
Tx Data
Rx Data
RTS
Video Sync
Reset
Rev 1.0
The following table describes the function of each LED on the front panel of the power
supply module.
Table 2-4 LED Indicators
Description
Flashes on when there is data present on the backplane transmit data line
Flashes on when there is data present on the backplane receive data line
Flashes on when the chassis is transmitting data
On when sync input is present
On when the reset signal on the backplane is active
16 900.0855
10/06