Thecus N7700 User Manual page 42

Click Yes to reboot the system.
Once the system has rebooted, you will be returned to the File System Check
prompt. There you will see the available RAID volumes to run the file system
check on. Check the desired RAID volumes and click Next to proceed with the file
system check. Click Reboot to reboot without running the check.
Once you click Next, you will see the following screen:
Click Start to begin the file system check. Click Back to return to the previous
screen. Click Reboot to reboot the system.
When the file system check is run, the system will show 20 lines of information
until it is complete. Once complete, the results will be shown at the bottom.
42