Nfs Share; Snap (Snapshot Configuration) - Thecus N7700 User Manual

NFS Share

To allow NFS access to the share folder, enable the NFS Service, and then set up
hosts with access rights by clicking Add.
NFS Share
Item
Hostname
Privilege
Guest System Support
IO Mapping
Apply
Back

Snap (Snapshot configuration)

If added folder has located in the RAID volume with "ZFS" file system, then the
folder management screen with "Snap" button will be configurable.
Description
Enter the name or IP address of the host
Host has either read only or writeable access to the folder.
There are two selections available:
• Unix / Linux System
• AIX (Allow source port > 1024)
Choose the one which best fits your needs.
There are three selections available:
• Guest system root account will have full access to this
share (root:root).
• Guest system root account will be mapped to
anonymous user (nobody:nogroup) on NAS.
• All user on guest system will be mapped to anonymous
user (nobody:nogroup) on NAS.
Choose the one which best fits your needs.
Click to save your changes.
Click to abandon changes.
38