Storage Management; Disks Information - Thecus N7700 User Manual

Finally, click Apply to save your changes.
Example - Monday: On: 8:00; Off: 16:00
System will turn on at 8:00 AM on Monday, and off at 16:00 on Monday. System
will turn on for the rest of the week.
If you choose an on time, but do not assign an off time, the system will turn on
and remain on until a scheduled off time is reached, or if the unit is shutdown
manually.
Example - Monday: On: 8:00
System will turn on at 8:00 AM on Monday, and will not shut down unless
powered down manually.
You may also choose two on times or two off times on a particular day, and the
system will act accordingly.
Example - Monday: Off: 8:00; Off: 16:00
System will turn off at 8:00 AM on Monday. System will turn off at 16:00 PM on
Monday, if it was on. If the system was already off at 16:00 PM on Monday,
system will stay off.

Storage Management

The Storage Menu displays the status of storage devices installed in the N7700,
and includes storage configuration options such as RAID and disk settings, folder
configuration, and Nsync settings.

Disks Information

From the Storage menu,
choose the Disks item
and the Disks
Information screen
appears. From here, you
can see various items
about installed SATA or
SAS hard disks. Blank
lines indicate that a
SATA\SAS (N7700SAS
only) hard disk is not
currently installed in that
particular disk slot.
Disks Information
Item
Disk No.
Capacity
Model
Firmware
Status
Total Capacity
Disk Power
Management
Description
Indicates disk location.
Shows the hard disk capacity.
Displays the hard disk model name.
Shows the hard disk firmware version.
Indicates the status of the disk. Can read OK, Warning, or
Failed.
Shows the total hard disk capacity.
The administrator can set the disk to power down after a period
of inactivity.
27