Advertisement
STEP 1
SETTING UP YOUR DIGITAL VIDEO RECORDER (DVR)
* This set-up guide assumes you are connecting cameras (not included) to the Digimerge DVR. Consult your DVR's owners manual for alternative DVR connection
and/or information to install a hard drive.
Pa cka g e Cont ents
NOT INCLUDED - CAMERAS / BROADBAND ROUTER
3
Insert the Power Cord to the other end of the AC Adaptor
and plug it to an electrical outlet
BACK OF THE DVR
POWER CORD
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technologies Inc. reserves the right to modify product design, specifi cations and prices, without notice and without incurring any obligation. E&OE © 2006 Digimerge. All rights reserved.
VCE300 Series Page 2
Version 1.02
1
Connect the cameras (not supplied) to the CH1,
CH2, CH3, CH4 Video Inputs (BNC Inputs)
BACK OF THE DVR
4
Ensure to turn ON the Power switch (located on the back
side of the DVR).
AC ADAPTOR
2
Connect the AC Adapter to the DVR
Your system is now ready to use. Refer to
your DVR's owner's manual to learn how to
record, playback, use the search features and
all other features available with this system.
Refer to Dynamic DNS Setup (Step 4) for Set-
ting Up Remote Security Monitoring.
BACK OF THE DVR
BACK OF THE DVR
ww w . d i g i m e rg e . c o m
Advertisement
