Advertisement
STEP 4
DYNAMIC DNS SETUP FOR REMOTE SECURITY MONITORING
Port forwarding Your Router and the Creation of a DDNS Account with Digimerge is required in order for you to have Remote Internet Access.
9
Accessing the DVR Locally / Remotely with a PC
Once the DVR and the Local Network have been successfully confi gured,
a connection can be made with a Local PC (a PC within the same network
as the DVR), or remotely (a PC from outside the network via the Internet).
NOTE: YOUR COMPUTER AND YOUR DVR MUST BE
CONNECTED TO THE SAME ROUTER
10
Logging Into Live Monitoring
Once the DigiClient has been installed and has been launched on the computer,
a pop-up window will appear. It should ask you to Register an Admin Password
(this password is separate from the numeric DVR password, this password will
only be used to login to the DigiClient Software).
Login in as "Administrator", and enter DigiClient Administrator password .
The DigiClient software interface will load once you have successfully logged in.
Click on the "DVR List" button located in the top left of the DigiClient 4.0 Screen.
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technologies Inc. reserves the right to modify product design, specifi cations and prices, without notice and without incurring any obligation. E&OE © 2006 Digimerge. All rights reserved.
VCE300 Series Page 12
Version 1.02
(continued)
The DVR List should appear, fi ll in the appropriate network and
password information and click the "Add" Button.
The DVR information should be populated in the above list,
Select the DVR by clicking on it, and then click on the Connect
Button. A login window should appear, Enter in the DVR's 8
digit password, and press "Ok".
If the DVR and the software are correctly confi gured, the
cameras should display in the DigiClient Screen.
w ww . d i g i m e rg e . c o m
Advertisement
