Advertisement
STEP 4
DYNAMIC DNS SETUP FOR REMOTE SECURITY MONITORING
Port forwarding Your Router and the Creation of a DDNS Account with Digimerge is required in order for you to have Remote Internet Access.
1
Connect one end of ethernet cable
(not supplied) to the DVR, the other
end to the broadband router (not in-
cluded). Power router and DVR ON if
not already ON
LAN (LOCAL AREA NETWORK)
BACK OF A ROUTER (NOT INCLUDED)
BACK OF A GENERIC DVR
TO YOUR COMPUTER
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technologies Inc. reserves the right to modify product design, specifi cations and prices, without notice and without incurring any obligation. E&OE © 2006 Digimerge. All rights reserved.
VCE300 Series Page 10
Version 1.02
2
Record the MAC Address
To fi nd the DVR's MAC address, press
the STATUS button on your DVR; the
MAC address can be found on page
2/2 of the DVR Status Screen.
WAN (WIDE AREA
NETWORK)
3
Open your Web Browser. Enter
http://ddns.digimerge.net
http://ddns.digimerge.net
w ww . d i g i m e rg e . c o m
Advertisement
