Table of Contents
Advertisement
MAINTENANCE & ADJUSTMENTS
Fuel Tube Inspection
Check the fuel supply and return tubes, and
replace any tube that is damaged, cracked, or
leaking.
Refer to the Honda shop manual for tube
replacement instructions, or take the tiller to a
Honda servicing dealer.
Fuel Filter and Fuel Tank Cleaning
1. Remove the fuel tank cap.
2. Tip the tiller as shown and empty the fuel tank
into an approved gasoline container. Use a
funnel to avoid spilling gasoline.
3. Pull the fuel filter out through the fuel filler neck
by hooking the black fuel supply tube with a
piece of wire, such as a partly straightened
paper clip.
4. Inspect the fuel filter. If the fuel filter is dirty,
wash it with nonflammable solvent. Be careful
to avoid damaging the filter.
5. Replace the filter if it is damaged or excessively
dirty.
6. Rinse sediment from the fuel tank with
nonflammable solvent.
7. Insert the fuel filter in the fuel tank, and install
the fuel tank cap.
FUEL FILTER
26
FUEL TANK
FUEL
SUPPLY
TUBE (black)
FUEL
RETURN
TUBE
(clear)
FUEL
SUPPLY
TUBE
(black)
FUEL TANK
CAP
WIRE
FUEL
FILTER
FG100 TILLER
Hide quick links:
Advertisement
Table of Contents
