Switching The Server On And Off - Fujitsu PRIMERGY RX220 Operating Manual

Switching the Server ON and OFF

4 Identification (ID) indicator (blue)
Lights up when the system has been selected by pressing the ID button.
To deactivate, press the button again.
The identification indicator lights up synchronously with the corre-
sponding indicator on the rear.
The ID indicator can also be activated via ServerView and its status
reported to ServerView.
Table 4: Indicators on the rear
5.2 Switching the Server ON and OFF
V
CAUTION!
If after switching ON the server there is nothing but flickering stripes on
the screen, switch the server OFF immediately (see
on the Monitor Screen" on page
The ON/OFF button does not disconnect the server from the mains. To
disconnect from the mains completely, remove the power plug.
48
Preparation for Use and Operation
59).
Operating Manual
"Flickering Stripes
RX220