Speed View; Automatic Lap Recording; Heart Rate View; Sport Zones - Polar Electro RS800 User Manual

Polar RS800 User Manual
Rename your shoes
Select
Settings > Features > adidas / Shoes 2 > Rename
Type the name with UP, DOWN and OK.
Select your sensor type*
Select
Settings > Features > adidas / Shoes 2 > Sensor type > Integrated / Shoelaces
Integrated: the sensor is in the sole cavity of the shoe (special footwear required). Shoelaces: the
sensor is fastened to the shoelaces.
Slight differences in distance measurement occur, depending on whether the stride sensor is fastened
to the shoelaces or placed inside the shoe. For the most accurate results, it is recommended to
calibrate the sensor every time its position is changed. For further information, see Calibrate the Stride
Sensor.
Using Other Shoes
Select
Settings > Features > Shoes > Other
Running distances are only accumulated in the Total and Weekly distance files, and not assigned to a
specific shoe.
When starting an exercise recording, you can easily change the shoe selection. In time mode, press
press and hold
DOWN
selection.

Speed View*

Select
Settings > Features > Speed view > km/h (mph) or min/km (min/mi)

Automatic Lap Recording*

Set the automatic lap recording
Select
Settings > Features > A.Lap > On > set the lap distance
The running computer will automatically record laps. Choose

Heart Rate View

Define the way to display your heart rate
Select
Settings > Features > HR view > HR / HR% / HRR%

Sport Zones

Define the sport zones in the running computer
Select
Settings > Features > Sport zones > Sport zone low limit
Set the lower limit of sport zone 1 by pressing UP or DOWN. Then press OK. Set the lower limits of
each sport zone in the same way. When setting the lower limit, the upper limit of the previous zone is
set automatically.
Press and hold LIGHT to switch between sport zone views:
(beats per minute) or
BPM
You can change settings easily by using the software. For further information, see software help.
*Optional s3 stride sensor W.I.N.D. required.

User Settings

Set accurate user information in the running computer to receive the correct feedback on your
performance.
To set user information in the running computer
. The number in the lower right hand corner of the display indicates the shoe
(percentage of heart rate reserve).
HRR%
to deactivate.
Off
(percentage of maximum heart rate) or
HR%
and
OK
26