Unpacking
Remove all the cardboard from
the mower, including the
cardboard and piece of paper
around the handlebar.
Handlebar Setup
Loosen the two knobs on the
lower handlebar enough to
raise the handlebar into the
mowing position.
Depress the flywheel brake lever while raising the handlebar.
Select a desired handlebar height adjustment position and tighten the
knobs securely.
Grass Bag Assembly (HRR)
Slide the grass bag frame into the grass bag and attach the clips as
shown.
BAG FRAME
Lift the rear discharge guard,
remove the mulching plug,
then install the grass bag.
GRASS BAG
GRASS BAG
HANDLE
FLYWHEEL BRAKE LEVER
BAG
FRAME
SET-UP
LOCKING
KNOB (2)
PLASTIC CLIP
REAR DISCHARGE
GUARD
47