Honda HRR216TDA Owner's Manual page 12

CONTROLS & FEATURES
Flywheel Brake Lever
This lever is connected to the
engine flywheel brake and the
engine switch. The engine will not
start or run unless this lever is held
against the handlebar.
Drive Clutch Lever (SDA, TDA)
The drive clutch lever engages and
disengages the transmission that
drives the rear wheels. The drive
clutch lever should only be
engaged after the engine has been
warmed up.
Shift Lever (TDA)
The shift lever selects the mower ground speed.
1 (slow)
2 (medium)
3 (fast)
10
For mowing thick grass or
maneuvering in small areas.
For intermediate self-propelled
speed.
For maximum self-propelled
speed in large, open areas and
for transport.
FLYWHEEL BRAKE
LEVER
DRIVE CLUTCH LEVER
(SDA, TDA)
SHIFT
LEVER (TDA)