SMART Board Board 600 Series Installation And User Manual page 27

19 | I N S T A L L IN G A N D S E C U R I N G Y O U R S M A R T B O A R D I NT E R A C T I V E
W H I T E B O A R D
If you're installing a SMART Board
685/SBD685 or 690/SBD690 interactive
whiteboard, space your wall-mounting brackets
4" (10.2 cm) or 6" (15.3 cm) apart respectively,
and then mark the location of the ten mounting
holes on the wall.
WARNING
Use two wall-mounting brackets to install
your SMART Board 685/SBD685 or
690/SBD690 interactive whiteboard.
Using only one bracket could result in
personal injury or product damage.
3. Use the Phillips No. 2 screwdriver to secure an
included self-tapping wall anchor at each mark.
CAUTION
Do not use a hammer to secure these
anchors.
If you find it impossible to screw an anchor flush
with the wall, you might have encountered a
stud. If this is the case, you don't need to use
an anchor in this location. The stud will provide
adequate support for the screw that secures the
bracket to the wall.
NOTES
– For a concrete wall, drill holes at the marks, and insert concrete anchors
(not included) into the holes.
– If necessary, stand on a stepladder so that you're able to secure
these wall anchors flush to the wall.
4. Using the screwdriver, secure the wall-mount
bracket to the self-tapping wall anchors with the
included screws.
5. With the help of another person, temporarily
hang your interactive whiteboard on the center
of its wall-mounting bracket.
685/SBD685: 4" (10.2 cm)
690/SBD690: 6" (15.3 cm)