SMART Board Board 600 Series Installation And User Manual page 26

To wall-mount your
interactive whiteboard
18 | I N S T A L L IN G A N D S E C U R I N G Y O U R S M A R T B O A R D I NT E R A C T I V E
W H I T E B O A R D
NOTES
• To take full advantage of all the interactive features of your SMART product,
you must connect a digital projector (not included).
• Some steps in the following procedure look different than illustrated if you
have a SMART Board 685/SBD685 or 690/SBD690 interactive whiteboard.
Wall-Mounting Your Interactive Whiteboard
Follow this procedure to mount your SMART Board interactive whiteboard on a
framed wall surfaced with gypsum or drywall. Some notes are provided for concrete
wall installations.
1. Using a pencil, a carpenter's level and a
measuring tape or ruler, draw a horizontal line
on the wall, centered on the mid-point of your
interactive whiteboard's future position. If your
projector is already mounted on the ceiling, this
is roughly the center of your projected image.
NOTE
The illustration shows a common height for
adult users of SMART Board 680/SBD680
interactive whiteboards. Refer to the
previous pages for recommended mounting
heights for other models and audiences.
2. Using the mounting bracket as a template,
mark the location of the five mounting holes
on the wall.
OR
77 1/2"
(196.9 cm)