Installing And Setting Up 600 Series Interactive Whiteboards; Environmental Requirements; Temperature; Humidity - SMART Board Board 600 Series Installation And User Manual

Hide thumbs Also See for Board 600 Series:
Table of Contents

Advertisement

Installing and Setting Up 600 Series Interactive
Whiteboards

Environmental Requirements

Before installing your SMART Board 600 series interactive whiteboard, review the following
environmental requirements.

Temperature

SMART Board 600 series interactive whiteboards can operate in the temperature range of
41°F to 95°F (5°C to 35°C). In addition, the product can withstand storage temperatures from
-40°F to 120°F (-40°C to 50°C).

Humidity

SMART Board 600 series interactive whiteboards can operate between 5% and 80% relative
humidity non-condensing. Humidity above 80% might cause slight wrinkling in the sheet. The
wrinkles will disappear once the humidity is lowered.

Water and Fluid Resistance

SMART Board 600 series interactive whiteboards are for indoor use only and do not meet any salt-
spray or water ingress requirements. Do not pour or spray any liquids directly onto the interactive
whiteboard or any of its sub-components. These liquids might get into areas where they could
damage sensitive electronic components. Refer to page 30 for detailed instructions on cleaning
your interactive whiteboard.

Dust and Scratching

SMART Board 600 series interactive whiteboards are for use in office and classroom
environments and are not for industrial use where heavy dust and pollutants can cause
malfunctions or impaired operation. The design is for pollution degree 1 (P1) as per EN61558-1,
which is defined as "No pollution or only dry non-conductive pollution."

Electrostatic Discharge (ESD)

SMART Board 600 series interactive whiteboards meet the requirements of EN61000-4-2 severity
level 4 for direct and indirect ESD. No malfunction or damage up to 15kV (both polarities) with a
330 ohm, 150 pF probe (air discharge). Un-mated connectors meet 8kV for direct (contact)
discharge.

Conducted and Radiated Emissions

The narrowband radiated electric field from SMART Board 600 series interactive whiteboards
meets the limits for Class B performance as defined in EN55022/CISPR 22.

Installing and Setting Up 600 Series Interactive Whiteboards

7

Advertisement

Table of Contents
loading

This manual is also suitable for:

600 series

Table of Contents