Correcting Image Alignment Issues; Diagnosing Issues Using The Interactive Whiteboard System Indicators And Controls; Interactive Whiteboard Indicators And Controls - SMART Board Board 600i5 Configuration And User's Manual

C H A P T E R 6
Troubleshooting your interactive whiteboard system
For issues not covered in this chapter, contact your authorized SMART reseller
(smarttech.com/wheretobuy) or consult the SMART Support website (smarttech.com/support).

Correcting image alignment issues

Alignment errors occur when the projected image isn't perpendicular to the screen. Alignment errors
can occur when you mount your interactive whiteboard system on an uneven surface or a wall that
has obstructions, or if you swivel the projector too far from the vertical center of your interactive
whiteboard.
Use the instructions in the included SMART Board 660i5,680i5, 685i5 and 690i5 Interactive
Whiteboard System Installation Guide (smarttech.com/kb/154547) to eliminate most image
alignment issues.
Diagnosing issues using the interactive
whiteboard system indicators and controls
This section documents the indicators and controls of the interactive whiteboard system
components.

Interactive whiteboard indicators and controls

Your SMART Board 600 or D600 series interactive whiteboard includes the following indicators and
controls:
A Ready light
l
Pen tray buttons, indicator lights and sensors
l
The controller module's reset button
l
For more information about these indicators and controls and to resolve common issues, see the
SMART Board 600 and D600 Series Interactive Whiteboard Installation and User's Guide
(smarttech.com/kb/001414).
42